sales@hbpgvalve.com          +86-13613114201 
English
Home / News
API600 Wcb 150LB Rising Stem Industrial Gate Valve.jpg
Working principle of gate valve?

All valves are designed to stop, allow or throttle the flow of process fluid. Gate valve-an original valve structure-is very suitable for switching, mainly liquid, applications. The working principle of the gate valve is to lift a rectangular or circular gate plate from the fluid channel. When the valve is fully open, the inner diameter of the gate valve is full, which means that nothing obstructs the flow, because the gate valve and the pipe diameter have the same opening. This inner diameter also determines the valve diameter. One advantage of this full hole design is that the friction loss is very low, saving energy and reducing the total cost of ownership.This article is about how the gate value works.

READ MORE
2020 08-17
Butterfly-Valve.jpg
Working principle of Butterfly Valve

According to the definition of the British Association of Valves and Actuators, a butterfly valve is "a valve whose orifice rotates at a right angle to the direction of the fluid around an axis. In the open position, the fluid bypasses the valve of the orifice." In other words, the butterfly valve consists of a circle The valve disc or plate is formed in a shape, and the valve stem passes through the middle or is attached in an offset position. When opened, the valve flap rotates 90 degrees in the valve hole, aligns with the fluid, and creates an almost unrestricted flow path. Like the ball valve, the butterfly valve can be quickly closed by rotating 90 degrees. What do we know about it? How does it work? You will find it after reading this article.

READ MORE
2020 08-14
Wafer Butterfly Valve Split Shaft Pinless Cast Iron Pn16.jpg
What are the main standards for Butterfly Valve?

A butterfly valve is a quarter-turn rotary motion valve used to stop, regulate, and start flow. Butterfly valves are easy to open quickly. The 90-degree rotation of the handle provides full closure or opening of the valve. Large butterfly valves are usually equipped with a so-called gearbox, where the handwheel is connected to the valve stem via a gear. This simplifies the operation of the valve, but at the cost of speed.This article is about the standards and specifications of butterfly valve.

READ MORE
2020 08-10
Cast Iron Globe Valve DIN3202 F1 PN16 Straight .jpg
What are the main points of Globe Valve installation?

Globe valves are mainly used for steam or other media that require throttling applications. The advantage of the valve seat design is that when it is connected to the valve seat downward, the shape of the ball is used to effectively cut the fluid upwards until the fluid is completely sealed on the surface of the valve seat. However, this does cause a greater pressure drop than the gate valve and causes turbulence in the pipeline.The diameter, pressure level and material selection of all globe valves are the responsibility of the user or system designer. The process system can provide advice in this regard, but the selection process is entirely the responsibility of the end user or plant operator. This article is all about the installation,operation, and maintenance of the globe valve.

READ MORE
2020 08-06

ABOUT US

PRODUCTS

CONTACT US

Add: No.388 , Xinshi Industrial Park , Qiaoxi District ,Shijiazhuang City, Hebei province,China
SkypeSunny.zhu67
Mobile+86-13613114201 
WhatsApp / Wechat+86-13613114201 
Tel+86-311-66030586
Fax+86-311-66030586
Emailsales@hbpgvalve.com / 
jerry@hbpgvalve.com
SEND US
Contact Us
Copyright © 2020 HEBEI PENG GUANG VALVE CO., LTD.  Sitemap
Support By Leadong